> ## Documentation Index
> Fetch the complete documentation index at: https://support.humanizing.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Assign and publish a project

> There are two ways to assign your project to your avatar. First, you can assign it directly from the project. Second, you navigate to the My Robot section. This page shows you both ways.

#### Assign it to your avatar

Once you have created a an avatar-project, you can assign your avatar frame to an avatar. Click the **gear icon** in the upper left corner of your avatar frame and then click **Assign Robots**. Now you should see the list of avatars (the same one you see under the *My Robots* section when you navigate back).

![Image](https://content.gitbook.com/content/FM0lFFYLpwPxlK9jVfyV/blobs/1LwsHt9jVoteYIVs8t1K/image.png)

![Image](https://content.gitbook.com/content/FM0lFFYLpwPxlK9jVfyV/blobs/pMuM9v2KnrRCB4BNN3KU/assign_flow.gif)

#### Publish your project

The two buttons\_ Preview in Browser\_ and \_Copy live link \_will appear. The Button *Preview in Browser *will open the Avatar in a new browser tab and is perfect for testing. You might see a watermark over your avatar. For now we can ignore that. When your avatar project goes live, click the *Copy Live link* to run the project without a watermark*:*

\_ \_

![Image](https://content.gitbook.com/content/FM0lFFYLpwPxlK9jVfyV/blobs/yWqsbDhWPIF8e7iAK2D9/image.png)

Once your avatar is deployed and you have made some changes, you can push your changes remotely.

#### Test without using GOs

We have a payment system called GO. To ensure that your tests do not cost anything, we need to turn off TTS (Test to Speech) and you need to test in preview.

##### Speech recognition in Preview Mode

Navigate to **My Robots**, click on the **three dots** next to your avatar and activate the *Toggle Speech recognition on/off* button.

![Image](https://content.gitbook.com/content/FM0lFFYLpwPxlK9jVfyV/blobs/c713vzqJqvQF5HBvBnsv/image.png)

If speech recognition (TTS and STT) is turned off and you are testing in preview mode, it will not cost you any GOs.

#### Face Recognition in Preview Mode

You can turn on \_Toggle Face detection and QR code reader on/off, \_it will not cost you any GOs in preview mode.

![Image](https://content.gitbook.com/content/FM0lFFYLpwPxlK9jVfyV/blobs/HysRRMSQsOgIAIqQNGZM/image.png)

####

#### Publish a project with speech recognition

If your project uses speech recognition, make sure that the toggle for speech recognition is enabled. This consumes GOs in Preview mode and also in Live mode.

![Image](https://content.gitbook.com/content/FM0lFFYLpwPxlK9jVfyV/blobs/uFQcX714gYj9gOlCxPP6/image.png)